//------------------------------------------------------------------------------
// HY12 Shape and Material Database 1.0
//------------------------------------------------------------------------------


All user-entered data for this file should be entered on one line, except for
the User-Defined shape which will use a minimum of three lines and use as many
as neccessary.
For a User-Defined shape, the number of station and elevation values should be 
equal and there should be one less manning's n value than station and elevation
values.
////////////////////////////////////////////////////////////////////////////////





//------------------------------------------------------------------------------
// HY12 Settings For Shape and Material Database
//------------------------------------------------------------------------------
Options for each Choice
	Units System can be Metric or English
--------------------------------------------------------------------------------
	Units System	English
End of Settings




//------------------------------------------------------------------------------
// HY12 Defaults (leave blank or -1 to have no default selection)
//------------------------------------------------------------------------------
The following line is a template for the default values:
Default <type of default> <index of default>
--------------------------------------------------------------------------------
	Default Material	-1
	Default Minor Loss	-1
	Default Shape		-1
End of Defaults





//------------------------------------------------------------------------------
// HY12 Report Sections and Options
//      Set section to 'yes' to include section in the report.
//      Set section to 'no' to exclude section from the report.
//      HY12 will write the sections of the report in the same
//      order that they exist in this file.
//------------------------------------------------------------------------------

//-------------
Report Sections
---------------
The following line is a template for the report section selection:
Show Report Section <yes or no>
--------------------------------------------------------------------------------
	Show Project Summary: 				yes
	Show Error Summary: 				yes
	Show Model Layout Report: 			yes
	Show Pipe Geometry Summary: 			yes
	Show Pipe Flow Summary: 			yes
	Show Channel Geometry Summary: 			yes
	Show Channel Flow Summary: 			yes
	Show Basin/Inlet Summary Table: 		yes
	Show HGL/EGL Summary Table: 			yes
	Show Time of Peak Flow Table: 			yes
	Show Outfall Hydrographs: 			yes
	Show Material Quantities: 			yes
	Show Detailed Individual Structure Report: 	yes
End of section selection

//------------
Report Options
--------------
The following line is a template for the report option selection:
Show Report option <yes or no>
--------------------------------------------------------------------------------
	Show Hydrographs at all nodes: 			yes
	Show Depth in Hydrographs: 			yes
	Show HGL in Hydrographs: 			no
	Show EGL in Hydrographs: 			no
	Name report after input file: 			yes
End of option selection





//------------------------------------------------------------------------------
// HY12 Materials
//------------------------------------------------------------------------------
The following line is a template for the materials:
<index> Material "<name of material>" <manning's n value> <k value> "<name of category>"
--------------------------------------------------------------------------------
	0	Material	"Concrete Pipe; Smooth (Good Condition)"	0.01	"Storm Drain Conduits"
	1	Material	"Concrete Pipe; Smooth (Poor Condition)"	0.011	"Storm Drain Conduits"
	2	Material	"Concrete Boxes; Smooth (Good Condition)"	0.012	"Storm Drain Conduits"
	3	Material	"Concrete Boxes; Smooth (Average Condition)"	0.0135	"Storm Drain Conduits"
	4	Material	"Concrete Boxes; Smooth (Poor Condition)"	0.015	"Storm Drain Conduits"
	5	Material	"Spiral Rip Metal Pipe; Smooth (Good Condition)"	0.012	"Storm Drain Conduits"
	6	Material	"Spiral Rip Metal Pipe; Smooth (Poor Condition)"	0.013	"Storm Drain Conduits"
	7	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Annular (Good Condition)"	0.022	"Storm Drain Conduits"
	8	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Annular (Average Condition)"	0.0245	"Storm Drain Conduits"
	9	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Annular (Poor Condition)"	0.027	"Storm Drain Conduits"
	10	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Helical (Good Condition)"	0.011	"Storm Drain Conduits"
	11	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Helical (Average Condition)"	0.017	"Storm Drain Conduits"
	12	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 2-2/3 X 1/2 Helical (Poor Condition)"	0.023	"Storm Drain Conduits"
	13	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 1 Helical (Good Condition)"	0.022	"Storm Drain Conduits"
	14	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 1 Helical (Average Condition)"	0.0235	"Storm Drain Conduits"
	15	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 1 Helical (Poor Condition)"	0.025	"Storm Drain Conduits"
	16	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 5 X 1 Helical (Good Condition)"	0.025	"Storm Drain Conduits"
	17	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 5 X 1 (Poor Condition)"	0.026	"Storm Drain Conduits"
	18	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 3 X 1 (Good Condition)"	0.027	"Storm Drain Conduits"
	19	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 3 X 1 (Poor Condition)"	0.028	"Storm Drain Conduits"
	20	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 2 Structural Plate (Good Condition)"	0.033	"Storm Drain Conduits"
	21	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 2 Structural Plate (Average Condition)"	0.034	"Storm Drain Conduits"
	22	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 6 X 2 Structural Plate (Poor Condition)"	0.035	"Storm Drain Conduits"
	23	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 9 X 2-1/2 Structural Plate (Good Condition)"	0.033	"Storm Drain Conduits"
	24	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 9 X 2-1/2 Structural Plate (Average Condition)"	0.035	"Storm Drain Conduits"
	25	Material	"Corrugated Metal Pipe, Pipe-Arch and Box; corrugation: 9 X 2-1/2 Structural Plate (Poor Condition)"	0.037	"Storm Drain Conduits"
	26	Material	"Corrugated Polyethylene; Smooth (Good Condition)"	0.009	"Storm Drain Conduits"
	27	Material	"Corrugated Polyethylene; Smooth (Average Condition)"	0.012	"Storm Drain Conduits"
	28	Material	"Corrugated Polyethylene; Smooth (Poor Condition)"	0.015	"Storm Drain Conduits"
	29	Material	"Corrugated Polyethylene; Corrugated (Good Condition)"	0.018	"Storm Drain Conduits"
	30	Material	"Corrugated Polyethylene; Corrugated (Average Condition)"	0.0215	"Storm Drain Conduits"
	31	Material	"Corrugated Polyethylene; Corrugated (Poor Condition)"	0.025	"Storm Drain Conduits"
	32	Material	"Polyvinyl Chloride (PVC); Smooth (Good Condition)"	0.009	"Storm Drain Conduits"
	33	Material	"Polyvinyl Chloride (PVC); Smooth (Average Condition)"	0.01	"Storm Drain Conduits"
	34	Material	"Polyvinyl Chloride (PVC); Smooth (Poor Condition)"	0.011	"Storm Drain Conduits"
	35	Material	"Concrete gutter (troweled finish)"	0.012	"Street and Pavement Gutters"
	36	Material	"Concrete gutter with small slope causing sediment deposition (troweled finish)"	0.014	"Street and Pavement Gutters"
	37	Material	"Asphalt Pavement gutter (Smooth texture)"	0.013	"Street and Pavement Gutters"
	38	Material	"Asphalt Pavement gutter with small slope causing sediment deposition (Smooth texture)"	0.015	"Street and Pavement Gutters"
	39	Material	"Asphalt Pavement gutter (Rough texture)"	0.016	"Street and Pavement Gutters"
	40	Material	"Asphalt Pavement gutter with small slope causing sediment deposition (Rough texture)"	0.016	"Street and Pavement Gutters"
	41	Material	"Concrete gutter-asphalt pavement (Smooth)"	0.013	"Street and Pavement Gutters"
	42	Material	"Concrete gutter-asphalt pavement with small slope causing sediment deposition (Smooth)"	0.015	"Street and Pavement Gutters"
	43	Material	"Concrete gutter-asphalt pavement (Rough)"	0.015	"Street and Pavement Gutters"
	44	Material	"Concrete gutter-asphalt pavement with small slope causing sediment deposition (Rough)"	0.017	"Street and Pavement Gutters"
	45	Material	"Concrete pavement (Float finish)"	0.014	"Street and Pavement Gutters"
	46	Material	"Concrete pavement with small slope causing sediment deposition (Float finish)"	0.016	"Street and Pavement Gutters"
	47	Material	"Concrete pavement (Broom finish)"	0.016	"Street and Pavement Gutters"
	48	Material	"Concrete pavement with small slope causing sediment deposition (Broom finish)"	0.018	"Street and Pavement Gutters"
	49	Material	"Concrete (Maximum)"	0.015	"Channel Lining"
	50	Material	"Concrete (Typical)"	0.013	"Channel Lining"
	51	Material	"Concrete (Minimum)"	0.011	"Channel Lining"
	52	Material	"Grouted Riprap (Maximum)"	0.04	"Channel Lining"
	53	Material	"Grouted Riprap (Typical)"	0.03	"Channel Lining"
	54	Material	"Grouted Riprap (Minimum)"	0.028	"Channel Lining"
	55	Material	"Stone Masonry (Maximum)"	0.042	"Channel Lining"
	56	Material	"Stone Masonry (Typical)"	0.032	"Channel Lining"
	57	Material	"Stone Masonry (Minimum)"	0.03	"Channel Lining"
	58	Material	"Soil Element (Maximum)"	0.025	"Channel Lining"
	59	Material	"Soil Element (Typical)"	0.022	"Channel Lining"
	60	Material	"Soil Element (Minimum)"	0.02	"Channel Lining"
	61	Material	"Asphalt (Maximum)"	0.018	"Channel Lining"
	62	Material	"Asphalt (Typical)"	0.016	"Channel Lining"
	63	Material	"Asphalt (Minimum)"	0.016	"Channel Lining"
	64	Material	"Bare Soil (Maximum)"	0.025	"Channel Lining"
	65	Material	"Bare Soil (Typical)"	0.02	"Channel Lining"
	66	Material	"Bare Soil (Minimum)"	0.016	"Channel Lining"
	67	Material	"Rock Cut (Maximum)"	0.045	"Channel Lining"
	68	Material	"Rock Cut (Typical)"	0.035	"Channel Lining"
	69	Material	"Rock Cut (Minimum)"	0.025	"Channel Lining"
	70	Material	"Open-weave textile (Maximum)"	0.028	"Channel Lining"
	71	Material	"Open-weave textile (Typical)"	0.025	"Channel Lining"
	72	Material	"Open-weave textile (Minimum)"	0.022	"Channel Lining"
	73	Material	"Erosion control blanket (Maximum)"	0.045	"Channel Lining"
	74	Material	"Erosion control blanket (Typical)"	0.035	"Channel Lining"
	75	Material	"Erosion control blanket (Minimum)"	0.028	"Channel Lining"
	76	Material	"Turf reinforcement mat (Maximum)"	0.036	"Channel Lining"
	77	Material	"Turf reinforcement mat (Typical)"	0.03	"Channel Lining"
	78	Material	"Turf reinforcement mat (Minimum)"	0.024	"Channel Lining"
End of Materials





//------------------------------------------------------------------------------
// HY12 Minor Losses
//------------------------------------------------------------------------------
The following lines are templates for the minor losses:
<index> Minor Loss "<name of minor loss>" <k value>
<index> Minor Loss "<name of minor loss>" <a value> <b value>
--------------------------------------------------------------------------------
	0	Minor Loss	"Regular flanged 90 Elbow"	0.43	-0.224
	1	Minor Loss	"Long radius flanged 90 Elbow"	0.435	-0.61
	2	Minor Loss	"Long radius flanged 45 Elbow"	0.578	-0.298
	3	Minor Loss	"Flanged Return Bend"	0.45	-0.271
	4	Minor Loss	"Flanged Tee - Line Flow"	0.45	-0.502
	5	Minor Loss	"Flanged Tee - Branch Flow"	0.26	-0.438
	6	Minor Loss	"Flanged Gate Valve"	1	-0.282
	7	Minor Loss	"Flanged Swing Check Valve"	2	0
End of Minor Losses





//------------------------------------------------------------------------------
// HY12 Shapes
//------------------------------------------------------------------------------
Choose the appropriate template for the shape type you wish to enter

The following line is a template for the trapezoidal channel:
<index> Trapezoidal "<name>" <side slope 1> <side slope 2> <bottom width (in or mm)>

The following line is a template for the rectangular channel:
<index> Rectangular "<name>" <bottom width (in or mm)>

The following line is a template for the triangular channel:
<index> Triangular "<name>" <side slope 1> <side slope 2>

The following line is a template for the circular channel (or pipe):
<index> Circular "<name>" <diameter (in or mm)>

The following line is a template for the elliptical channel (or pipe):
<index> Elliptical "<name>" <rise (in or mm)> <span (in or mm)>

The following line is a template for the closed rectangular channel (or pipe):
<index> RectangularPipe "<name>" <rise (in or mm)> <span (in or mm)>

The following line is a template for the user-defined channel (or cross-section)
 and is at least 5 lines long:
<index> UserDefined "<name>"
	Station <first station (x) (ft or m)> <second station (ft or m)> ... <final station (ft or m)>
	Elevation <first elevation (y) (ft or m)> <second elevation (ft or m)> ... <final elevation (ft or m)>
	ManningsN <Manning's n value of 1st segment (from point 1 to 2)>
	<Manning's n value of 2nd segment>...
	<Manning's n value of final segment>
	End UserDefined
--------------------------------------------------------------------------------
	0	Circular	""	12
	1	Circular	""	15
	2	Circular	""	18
	3	Circular	""	21
	4	Circular	""	24
	5	Circular	""	27
	6	Circular	""	30
	7	Circular	""	33
	8	Circular	""	36
	9	Circular	""	42
	10	Circular	""	48
	11	Circular	""	54
	12	Circular	""	60
	13	Circular	""	66
	14	Circular	""	72
	15	Circular	""	78
	16	Circular	""	84
	17	Circular	""	90
	18	Circular	""	96
	19	Elliptical	""	12	14
	20	Elliptical	""	12	16
	21	Elliptical	""	12	18
	22	Elliptical	""	14	16
	23	Elliptical	""	14	18
	24	Elliptical	""	14	20
	25	Elliptical	""	16	18
	26	Elliptical	""	16	20
	27	Elliptical	""	16	22
	28	Elliptical	""	18	20
	29	Elliptical	""	18	22
	30	Elliptical	""	18	24
	31	Elliptical	""	20	22
	32	Elliptical	""	20	24
	33	Elliptical	""	20	26
	34	Elliptical	""	22	24
	35	Elliptical	""	22	26
	36	Elliptical	""	22	28
	37	Elliptical	""	24	26
	38	Elliptical	""	24	28
	39	Elliptical	""	24	30
	40	Elliptical	""	26	28
	41	Elliptical	""	26	30
	42	Elliptical	""	26	32
	43	Elliptical	""	28	30
	44	Elliptical	""	28	32
	45	Elliptical	""	28	34
	46	Elliptical	""	30	32
	47	Elliptical	""	30	34
	48	Elliptical	""	30	36
	49	Elliptical	""	32	34
	50	Elliptical	""	32	36
	51	Elliptical	""	32	38
	52	Elliptical	""	34	36
	53	Elliptical	""	34	38
	54	Elliptical	""	34	40
	55	Elliptical	""	36	38
	56	Elliptical	""	36	40
	57	Elliptical	""	36	42
	58	Elliptical	""	38	40
	59	Elliptical	""	38	42
	60	Elliptical	""	38	44
	61	Elliptical	""	40	42
	62	Elliptical	""	40	44
	63	Elliptical	""	40	46
	64	Elliptical	""	42	44
	65	Elliptical	""	42	46
	66	Elliptical	""	42	48
	67	Elliptical	""	42	50
	68	Elliptical	""	48	50
	69	Elliptical	""	48	52
	70	Elliptical	""	48	54
	71	Elliptical	""	48	56
	72	Elliptical	""	54	56
	73	Elliptical	""	54	58
	74	Elliptical	""	54	60
	75	Elliptical	""	54	62
	76	Elliptical	""	60	62
	77	Elliptical	""	60	64
	78	Elliptical	""	60	66
	79	Elliptical	""	60	68
	80	Elliptical	""	66	68
	81	Elliptical	""	66	70
	82	Elliptical	""	66	72
	83	Elliptical	""	66	74
	84	Elliptical	""	72	74
	85	Elliptical	""	72	76
	86	Elliptical	""	72	78
	87	Elliptical	""	72	80
	88	RectangularPipe	""	12	14
	89	RectangularPipe	""	12	16
	90	RectangularPipe	""	12	18
	91	RectangularPipe	""	14	16
	92	RectangularPipe	""	14	18
	93	RectangularPipe	""	14	20
	94	RectangularPipe	""	16	18
	95	RectangularPipe	""	16	20
	96	RectangularPipe	""	16	22
	97	RectangularPipe	""	18	20
	98	RectangularPipe	""	18	22
	99	RectangularPipe	""	18	24
	100	RectangularPipe	""	20	22
	101	RectangularPipe	""	20	24
	102	RectangularPipe	""	20	26
	103	RectangularPipe	""	22	24
	104	RectangularPipe	""	22	26
	105	RectangularPipe	""	22	28
	106	RectangularPipe	""	24	26
	107	RectangularPipe	""	24	28
	108	RectangularPipe	""	24	30
	109	RectangularPipe	""	26	28
	110	RectangularPipe	""	26	30
	111	RectangularPipe	""	26	32
	112	RectangularPipe	""	28	30
	113	RectangularPipe	""	28	32
	114	RectangularPipe	""	28	34
	115	RectangularPipe	""	30	32
	116	RectangularPipe	""	30	34
	117	RectangularPipe	""	30	36
	118	RectangularPipe	""	32	34
	119	RectangularPipe	""	32	36
	120	RectangularPipe	""	32	38
	121	RectangularPipe	""	34	36
	122	RectangularPipe	""	34	38
	123	RectangularPipe	""	34	40
	124	RectangularPipe	""	36	38
	125	RectangularPipe	""	36	40
	126	RectangularPipe	""	36	42
	127	RectangularPipe	""	38	40
	128	RectangularPipe	""	38	42
	129	RectangularPipe	""	38	44
	130	RectangularPipe	""	40	42
	131	RectangularPipe	""	40	44
	132	RectangularPipe	""	40	46
	133	RectangularPipe	""	42	44
	134	RectangularPipe	""	42	46
	135	RectangularPipe	""	42	48
	136	RectangularPipe	""	42	50
	137	RectangularPipe	""	48	50
	138	RectangularPipe	""	48	52
	139	RectangularPipe	""	48	54
	140	RectangularPipe	""	48	56
	141	RectangularPipe	""	54	56
	142	RectangularPipe	""	54	58
	143	RectangularPipe	""	54	60
	144	RectangularPipe	""	54	62
	145	RectangularPipe	""	60	62
	146	RectangularPipe	""	60	64
	147	RectangularPipe	""	60	66
	148	RectangularPipe	""	60	68
	149	RectangularPipe	""	66	68
	150	RectangularPipe	""	66	70
	151	RectangularPipe	""	66	72
	152	RectangularPipe	""	66	74
	153	RectangularPipe	""	72	74
	154	RectangularPipe	""	72	76
	155	RectangularPipe	""	72	78
	156	RectangularPipe	""	72	80
End of Shapes

End of HY12 Shape and Material Database